Product Description; Recharging The Device; Turning On And Off - Cellular Line INTERPHONE Bedienungsanleitungen

Product description

A. Bluetooth module
1. Multifunctional button
2. Multifunctional LED
3. + Volume control button
4. - Volume control button
5. Multifunctional socket / recharging and accessories
6. Guide for Bluetooth module connection
B. Headset with microphone and foam windscreen on a flexible boom
7. Headset
8. Microphone and foam windscreen
9. Headset/microphone connector

Recharging the device

NOTE: on opening the box, the first operation to be carried out is to
recharge the battery using the charger supplied. (F).
1. When the indicator light (2) which is normally blue, begins to flash
red the Bluetooth module battery is almost flat. Make sure you
charge the battery as soon as possible using the charger supplied.
2. Insert the battery charger connector (F) in the Bluetooth module sock-
et (5), then connect the power cable to a 110-220V electricity socket.
While recharging, the LED (2) flashes green and red alternately.
3. Once charging is complete, the LED (2) remains a constant green.
4. Disconnect the battery charger.

Turning on and off

N.B.
If the following operations are carried out when the Bluetooth mod-
ule is not mounted on the helmet, in order to hear the sound signals,
the headset and microphone must be connected to the socket on the
Bluetooth module (5)
TO TURN ON: press the multifunctional button (1) for approx. 1 second
until the LED (2) turns blue and begins to flash, the device will then
emit a confirmation sound.
TO TURN OFF: press and hold down the multifunctional button for
approx. 5 seconds (1), during this time the blue LED(2) of the device
will flash and emit 2 sounds from the headset.
On the third (two-tone) sound, release the button and the LED (2) will
change from blue to red. Wait a few seconds. The red LED (2) will
remain lit for approx. another 5 seconds before the Bluetooth module
turns off completely.
INTERPHONE
GB
19