Cleaning And Maintenance; Troubleshooting; Environmental Protection - Concept SO1025 Bedienungsanleitung

EN

CLEANING AND MAINTENANCE

CAUTION!
Always disconnect the power supply cable from the mains outlet before cleaning the appliance.
Prior to handling, make sure the appliance is cool!
The surface of the unit may only be cleaned using a moist cloth. Do not use any detergents or hard objects as they may
damage the unit surface!
Wash the drying screens in warm water with a bit of detergent. If the screens are very dirty, leave them in the water and
then use a soft brush.
Never clean the base with the fan under running water, do not rinse it, and do not submerge it in water!

TROUBLESHOOTING

Problem
The motor is not running.
The motor is blowing but
the unit is not warming up.
ACCESSORIES
The following accessories can be bought with the unit:
Drying screen order code 42390620
SERVICING
Any extensive maintenance or repair requiring access to the internal parts of the product shall be performed by an
authorized service center.

ENVIRONMENTAL PROTECTION

• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste.
It must be taken to the collection point of an electric and electronic equipment recycling facility. By making
sure this product is disposed of properly, you will help prevent the negative effects on the environment and
human health that would otherwise result from inappropriate disposal of this product. You can learn more
about recycling this product from your local authorities, a household waste disposal service or in the shop
where you bought this product.
SO1025
Cause
The plug is inserted into the socket
incorrectly or insufficiently.
The socket is not supplied with
electricity.
The supply cable is damaged.
The heat fuse against overheating
has reacted.
Price according to the pricelist in force
Solution
Check the plug connection.
Check to make sure voltage is present, e.g. by
using another appliance.
Refer the unit to an authorised service centre
for testing and repair.
Disconnect the power supply cable from
the socket. Let the unit cool. If the body does
not start warming up even after cooling, refer
to an authorised service centre.
21