Warranty; Rights Reserved; Intended Use - GENTILIN C 330/03 Bedienungs-Anleitungen

MAN_C330_A001
1) GUARANTEE DECLARATION: the Manufacturer gives an undertaking to the End-User to replace, repair or otherwise
intervene in the machine, if it has conformity defects that compromise its correct use and operation, but only if such
defects are attributable to the actual liability of the Manufacturer. The Manufacturer reserves the right to adopt the
optimal solution to restore the conformity of the machine within a reasonable period of time. The guarantee does
not cover parts of the Products subject to normal wear and tear and/or deterioration or defects resulting from inap-
propriate transport.
2) END-USER: the End-User is the person who buys the machine to use it directly. The End-User who buys the machine
as a natural person for purposes that do not fall within the scope of commercial or professional activity is defined as
a "consumer". The End-User is defined as a "professional or company" when the purchase is made by a professional or
by a company acting for purposes which fall within the scope of its commercial or professional activity.
3) TERMINALS: the Manufacturer is liable to the End-User when the lack of conformity occurs within the following terms
from the date of purchase:
24 months if the purchase was made by a 'consumer' as described in point 2).
12 months if the purchase was made by a "professional or company" as described in point 2).
All End-Users have the right to extend the guarantee (Extended Guarantee) for up to three years from the date of pur-
chase of the machine if they: (a) have registered their purchase on the website www.gentilincompressors.com within
seven days of purchase and (b) have completed the registration form completely and accurately, filling in the required
fields with exact, complete and true information and have kept the registration code to be mentioned in the event
of problems. Replaced parts or products will remain under guarantee until the original product guarantee expires.
4) VALIDITY: the guarantee is valid if the End-User notifies the Manufacturer of the conformity defect within 2 months
from the date on which he has discovered it, but within the final term indicated in point 3) above. The above report
must be accompanied by a regular purchase document (tax receipt or invoice). In the case of an Extended Guarantee,
the declaration must also indicate the registration code.
5) FORFEIT: the guarantee will be void if the purchaser uses the machine improperly and/or not in accordance with
the provisions of this "Instruction Manual" provided by the Manufacturer, or if the lack of conformity was caused by
inexperience on the part of the purchaser or by chance. The use of the products after the discovery of defects releases
the Manufacturer from any guarantee commitment or liability.
6) LIABILITY: the Manufacturer is released from any liability resulting from any damage sustained by the purchaser,
resulting from loss or diminution of production which derives from any lack of conformity.
7) COSTS: the End-User has the right to the restoration of the conformity of the machine under guarantee without any
costs for labour or materials. The shipping methods must be agreed with the authorised dealer or with the Manufacturer.
In the event that the non-conformity is only apparent or the complaint arrives after the deadline, the Manufacturer
may charge the cost of both transport and any repair that is indicated by the authorised dealer or the Manufacturer.
• Rights reserved with regards the "Instruction Manual" remain with the Manufacturer.
• No parts of the present manual, in full or in part, may be copied and/or passed on in any way, without written autho-
risation from the Manufacturer.
• All the brands mentioned belong to the respective owners.
FIELD OF OPERATION
Industrial, handicraft and civil.
8

8. WARRANTY

9. RIGHTS RESERVED

10. INTENDED USE

Rev. 01_05_2017