Switching On/Off - Würth PLL 11 Gebrauchsanweisung

Switching on/off

• ON: Briefly press the On/Set key 1.
• OFF: Press and hold down the On/Set key 1.
Laser functions
Pressing the On/Set key 1 activates the following laser
functions:
PLL 11
Action
not in Lock in Lock mode not in Lock
mode
only
all points horizontal
1x
line
all lines and only vertical
2x
points line
only
plumbing again as 1x
3x
point
4x again as 1x -
CLL 11 / CLG 15
in Lock
mode mode
only
all lines horizontal
line
horizontal only vertical
line line
vertical line again as 1x
again as 1x -
3
Self-levelling and Lock functions
The instrument automatically levels itself within the
specified grade range (Refer to "Technical data") .
Press the Lock switch 3 in order to transport or tilt the
instrument beyond the self-levelling range. When
locked, the pendulum is fixed and the self-levelling func-
tion is deactivated.
Pulse (CLL 11 + PLL 11)
To be able to detect the laser lines over long distances
(> 15 m) or in unfavourable lighting conditions, a laser
detector can be used. The detector is able to locate the
laser beam in Pulse mode, even over long distances.
en
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
Operation
M
TR