Intended Use; Safety Information; Storage, Cleaning - Livarno Living IAN 317603 Aufbauanleitung

Congratulations!
You have chosen to purchase a high-quality item.
Familiarise yourself with the item before using it
for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Only use this item in the manner described and
for the purpose for which it is intended. Store
these assembly instructions carefully. When
passing the item on to third parties, please also
hand over all accompanying documents.
Package contents (Fig. A)
1 x table, disassembled (1–23)
1 x set of assembly materials (A–K)
1 x assembly instructions
Technical data
Dimensions: approx. 110 x 53.5 - 83 x 59.5cm
(W x H x D)
The item belongs to size class 2–7 (see „Size
class 2–7" table)
40 Maximum load: 40kg
Date of manufacture (month/year):
04/2019

Intended use

The item is designed to be used indoors by child-
ren. The item is intended for private use only.

Safety information

Life-threatening hazard!
• Never leave children unattended with packag-
ing materials. There is a risk of suffocation.
Risk of injury!
• Make sure the item is stabilised before use.
• Place the item on a level surface.
• The item may only be used with adult supervi-
sion and should not be used as a toy.
• Check the item for damage or wear before
each use.
Check regularly to make sure all screws are
tight!
• Never stand on the item.
• Keep the assembly tool out of reach of children.
Assembly
1. Assemble the item as shown in Figs. B–O.
Note: use a suitable Phillips screw driver (not
included) to tighten the screws.
2. Place the item on an even surface (Fig. P).
Adjusting the table height
(Fig. P)
The item has 6 different height adjustment levels.
These can be taken as a simplification of the
"size class 2–7" table.
• Ensure a healthy sitting position when adjust-
ing the height.
• Your feet should be flat and there should be
enough space between your thigh and the
table top.
• Your legs and arms should be bent at a 90°
angle.
• Your back should be straight and supported.
1. To adjust the table height, unscrew the knob
(16) at the back of the item and move the
table top up or down.
2. Screw the knob (16) back into one of existing
the holes.

Storage, Cleaning

Always keep the item dry and clean in a
temperature-controlled room. Clean with water
only and wipe dry afterwards with a cloth.
IMPORTANT! Never clean the product with
abrasive cleaning agents.
Disposal
Dispose of the article and the packaging
materials in accordance with current local
regulations. Packaging materials such as foil bags
are not suitable to be given to children. Keep the
packaging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
GB/IE 15