Technical Data; Safety Instructions - Milwaukee MS 304 DB Originalbetriebsanleitung

TECHNICAL DATA

Rated input ........................................................................ 1800 W .....................1800 W ..................... 1800 W ......................1800 W
Amps ........................................................................................ 8 A ........................15 A............................. 8 A ......................15,5 A
No-load speed .................................................................... 3200 min
Saw blade dia. x hole dia ...............................................305 x 30 mm .............305 x 30 mm .............305 x 30 mm ............. 305 x 30 mm
Saw blade thickness .............................................................. 2,4 mm .....................2,4 mm ..................... 2,4 mm ......................2,4 mm
Max. cutting width
Mitre 0°/ Bevel 0° .................................................... 102 / 342 mm ...........102 / 342 mm ........... 102 / 342 mm ............102 / 342 mm
Mitre 45°/ Bevel 0° .................................................. 102 / 241 mm ...........102 / 241 mm ........... 102 / 241 mm ............102 / 241 mm
Mitre 0°/ Bevel 45° ............................................. 57 / 342 mm .............57 / 342 mm ............. 57 / 342 mm ..............57 / 342 mm
Mitre 0°/ Bevel 45° ............................................. 45 / 342 mm .............45 / 342 mm ............. 45 / 342 mm ..............45 / 342 mm
Mitre 45°/ Bevel 45° ........................................... 57 / 241 mm .............57 / 241 mm ............. 57 / 241 mm ..............57 / 241 mm
Mitre 45°/ Bevel 45° ........................................... 45 / 235 mm .............45 / 235 mm ............. 45 / 235 mm ..............45 / 235 mm
Max. height
Mitre 0°/ Bevel 0° ...................................................... 166 / 53 mm .............166 / 53 mm ............. 166 / 53 mm ..............166 / 53 mm
Mitre 45°/ Bevel 0° .................................................... 166 / 10 mm .............166 / 10 mm ............. 166 / 10 mm ..............166 / 10 mm
Min. workpiece dimensions .................................... 130 x 35 x 2 mm ....... 130 x 35 x 2 mm ........130 x 35 x 2 mm ........130 x 35 x 2 mm
Weight according EPTA-Procedure 01/2003 ........................ 30,2 kg .....................30,2 kg ...................... 29,9 kg ......................29,9 kg
GB
GB
Noise/Vibration Information
Measured values determined according to EN 61029. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K=3dB(A)) .......................................... 95 dB (A) ..................95 dB (A) ............... 93,5 dB (A) ................93,5 dB (A)
Sound power level (K=3dB(A)) ............................................ 108 dB (A) ................108 dB (A) ................ 105 dB (A) .................105 dB (A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 61029.
Vibration emission value a
h
Sawing of wood ................................................................ < 2,5 m/s
Uncertainty K= ..................................................................... 1,5 m/s
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications, with
di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running
but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions, including those given in the accompanying brochure.
Failure to follow the warnings and instructions may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Appliances used at many di erent locations including open air should
be connected via a residual current device (FI, RCD, PRCD) of 30mA
or less.
English English
22
MS 305 DB
230 / 240 V 110 V
-1 -1
...............3200 min ................ 3900 min
2 2
................< 2,5 m/s .................... 3,3 m/s
2 2
....................1,5 m/s .................... 1,5 m/s
Always disconnect the plug from the socket before carrying out any
work on the machine.
Only plug-in when machine is switched o .
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
The handle lock must always be engaged when transporting the
mitre saw.
Ensure that the machine is always stable and secure (e.g. xed to a
bench)
Keep the oor area free of loose material e.g. chips and cut-o s.
Before using the tool please read the instructions. If possible have the
tool demonstrated.
Always use the protective shields on the machine.
Only use the saw with guards in good working order and properly
maintained, and in position.
MITRESAW
MS 304 DB
230 V / 240 V 110 V
-1 -
................3900 min
2 2
.....................3,3 m/s
2 2
.....................1,5 m/s