Taurus CUTMASTER Bedienungsanleitung Seite 9

- This appliance should be stored out of reach of children and/or the disabled.
- Do not expose the appliance to extreme temperatures.
- Keep the appliance in a dry, dust-free place, out of direct sunlight.
- Keep the appliance in good condition. Check that the moving parts are not
misaligned or jammed and make sure there are no broken parts or anomalies
that may prevent the appliance from operating correctly.
- Use the appliance and its accessories and tools in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use the appliance for operations different from those intended could
result in a hazardous situation.
- To push the food, always use the piece holder. Never use your fingers or other
accessories.
- Never leave the appliance unattended while in use.
- Do not use the appliance for more than 5 minutes at any one time. Allow to
cool for 15 minutes before subsequent use.
- Do not use the appliance with frozen goods or those containing bones.
Service:
- Make sure that the appliance is serviced only by specialist personnel, and
that only original spare parts or accessories are used to replace existing parts/
accessories.
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer's liability null and void.
Instructions for use
Before use:
- Make sure that all the product's packaging has been removed.
- Before using this product for the first time, it is advisable to test it without food.
- Before using the product for the first time, clean the parts that will come into
contact with food in the manner described in the cleaning section.
- Some parts of the appliance have been lightly greased. Consequently, the first
time the appliance is used a light smoke may be detected. After a short time,
this smoke will disappear.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Place the food on the lower support platform and fix the food pusher, which
will hold the food item in place.
- Adjust the thickness of the slice using the thickness control dial.
- Turn the appliance on, by using the on/off switch.
- Using the food pusher slide the food towards the blade.
Once you have finished using the appliance:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and allow it to cool before underta-
king any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Never submerge the appliance in water or any other liquid or place it under
running water.
- During the cleaning process, take special care with the blade, as it is very
sharp.
- It is advisable to clean the appliance regularly and remove any food remains.
- If the appliance is not in good condition of cleanliness, its surface may degra-
de and inexorably affect the duration of the appliance's useful life and could
become unsafe to use.
- Neither parts of this appliance are suitable for cleaning in the dishwasher.
- Dry all parts before its assembly and storage.
To disassemble the blade:
- The blade can be removed for cleaning. To do so, unscrew the the plastic
bold in the center of the blade (Fig 1.). After cleaning, install the blade again
in its palce.
Anomalies and repair
- Take the appliance to an authorised technical support service if product is
damaged or other problems arise. Do not attempt to disassemble or repair the
appliance yourself as this may be dangerous.
For EU product versions and/or in case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included in
a collection, classification and recycling system. Should you wish to dispose of
them, use the appropriate public recycling bins for each type of material.
Manual Cutmaster.indb 9
- The product does not contain concentrations of substances that could be
considered harmful to the environment.
This symbol means that in case you wish to dispose of the product
once its working life has ended, take it to an authorised waste
agent for the selective collection of Waste from Electric and
Electronic Equipment (WEEE).
This appliance complies with Directive 2006/95/EC on Low Voltage, Directive
2004/108/EC on Electromagnetic Compatibility, Directive 2011/65/EC on the
restrictions of the use of certain hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on the ecodesign requirements for
energy-related products.
19/12/13 17:46