Safety Advice And Warnings - Taurus CUTMASTER Bedienungsanleitung

English
Meat Slicer
Cutmaster
Dear customer,
Many thanks for choosing to purchase a TAURUS brand product.
Thanks to its technology, design and operation and the fact that it exceeds the
strictest quality standards, a fully satisfactory use and long product life can be
assured.
Description
A Thickness control dial
B Blade
C Upper support platform
D Lower support platform
E On/off switch
F Piece holder

Safety advice and warnings

- Read these instructions carefully
before switching on the appliance and
keep them for future reference. Failure
to follow and observe these instructions
could lead to an accident.
- Clean all the parts of the product that
will be in contact with food, as indicated
in the cleaning section, before use.
- This appliance shall not be used by
children. Keep the appliance and its
cord out of reach of children.
- This appliance can be used by people
with reduced physical, sensory or men-
tal capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- Blade is sharp and could cause harm,
be careful and avoid direct contact with
the blade' cutting edge.
- Pay special attention when handling
the blade, during assembly and disas-
sembly operations and during cleaning.
Manual Cutmaster.indb 8
- Always switch off the appliance and
disconnect from supply if it is left unat-
tended and before changing acces-
sories or approaching parts that move
in use, assembling, disassembling and
cleaning.
- This appliance must be used with the
support platforms and the piece holder
in position.
- If the connection to the mains has
been damaged, it must be replaced,
take the appliance to an authorised te-
chnical support service. Do not attempt
to disassemble or repair the appliance
by yourself in order to avoid a hazard.
- Ensure that the voltage indicated on the rating label matches the mains
voltage before plugging in the appliance.
- Connect the appliance to a socket that can supply a minimum of 10 amperes.
- The appliance's plug must fit into the mains socket properly. Do not alter the
plug. Do not use plug adaptors.
- Keep the working area clean and well lit. Cluttered and dark areas invite
accidents.
- Keep children and bystanders away when using this appliance.
- Place the appliance on a horizontal, flat, stable surface.
- Do not use the appliance if the cable or plug is damaged.
- If any of the appliance casings breaks, immediately disconnect the appliance
from the mains to prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor, if there are visible signs of
damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near water.
- Do not use the appliance with damp hands or feet, or when barefooted.
- Do not force the power cord. Never use the power cord to lift up, carry or
unplug the appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged or tangled cables increase the
risk of electric shock.
- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for signs of damage, and if the
cord is damaged, the appliance must not be used.
- As an additional protection to the electrical supply for the appliance, it is
advisable to have a differential current device with a maximum sensitivity of 30
mA. Ask for advice from a competent installer.
- Appliance must be supplied through a differential current device with a maxi-
mum sensitivity of 30 mA. Ask for advice from a competent installer.
- Do not touch the plug with wet hands.
- Take the necessary measures to avoid starting the appliance involuntarily.
- Do not overreach. Keep proper footing and balance at all times. This will allow
you to maintain control of the appliance at all times.
- Before using the appliance ensure that the blade is properly fixed in place.
- Do not touch metal parts or the body when it is operating, as it may cause
serious burns.
- Exercise precaution after employing the stop operation on the appliance as
the blade/s will continue moving from the effect of its own mechanical inertia.
- The temperature of the accessible surfaces may be high when the appliance
is in use.
Use and care:
- Fully unroll the appliance's power cable before each use.
- Do not use the appliance if the parts or accessories are not properly fitted.
- Do not use the appliance if the accessories attached to it are defective.
Replace them immediately.
- Do not use the appliance if the on/off switch does not work.
- Do not move the appliance while in use.
- Do not turn the appliance over while it is in use or connected to the mains.
- Do not force the appliance's work capacity.
- This appliance is for household use only, not professional, industrial use.
19/12/13 17:46