Setting The Day Program (Weekdays Individually) - Honeywell HR 40 Montage- Und Bedienungsanleitung

Setting the day program (weekdays individually):

1. Press the
PROG
2. Select the desired weekday with the adjustment dial. The weekdays are
numbered from 1 to 7 (Monday to Sunday).
3. Confirm with the
4. Use the adjustment dial to set the 1st switching point.
5. Confirm with the
6. Use the adjustment dial to set the 2nd switching point.
7. Confirm with the
8. Set the switching points 3 and 4 in the same way.
9. End the procedure with the
– or –
Select a weekday and repeat Steps 3–8.
The new periods are programmed.
button.
button.
PROG
button.
PROG
button.
PROG
AUTO
MANU
button.
37