Inhaltsverzeichnis
Werbung
REMARK:-
-
SAME OPERATION PROCEDURE FOR ENCODING TO SD/MMC CARD.
-
IF BOTH RECORDING SOURCE (USB PEN DRIVE AND SD/MMC CARD) BEING DETECTED BY THE
SYSTEM DURING ENCODING, PLEASE PRESS "SKIP UP
THE DESIRE SOURCE. THEN PRESS "
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF THE CD TRACK
-
THE SYSTEM WILL CREATE A " AUDIO " FOLDER IF THE MEDIA WITHOUT FOLDER INSIDEAND THEN
WILL STORE THE ENCODING TRACK IN IT.WHILE THE MEIDA HAVE BUILT FOLDER, THE ENCODED FILE
WILL STORE AT THE LAST FOLDER.
-
THE RECORDING FORMAT IS PRESET AT – MP3
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE"
-
RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE
ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO
THE USB OR SD/MMC CARD
IV) COPYING OF MP3 FILE
IF PUTTING A MP3 DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR
SD/MMC CARD IF PRESS THE" REC " BUTTON (3). THE OPERATION PROCEDURES IS SAME AS CD
ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3
FILE BEING READ.
REMARK: IF PRESS THE "
COPY FROM USB TO SD OR SD TO USB.
B) PHONO ENCODING
1.
SELECT "PHONO" MODE AND THEN PRESS THE "
2.
THE SYSTEM WILL SHOW "USB" OR "SD" & "
3.
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USBPOSITION.
4.
AFTER FINISH OF RECODING, PRESS THE "
STOP FLASHING AND RETURN TO "PHONO" MODE.
TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO TO USB/SD TRACK BY TRACE DURING ENCODING.
EVERY TIME WHEN PRESS THE "
ENCODING FROM PHONO, TAPE OR RADIO TO USB/SD, THE SYSTEM WILL GENERATE A NEW TRACK AND
CONTINUOUS THE RECRODING. THE TEXT "CHECK" AT LCD DISPLAY (2) WILL FLASHING ONE TIME, IT MEAN
THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING FROM PHONO INTO USB OR SD, THE
SELECTABLE RANGE FROM 32 / 64 /96 /128 / 192 / 256 KBPS.
1.
SET IN "PHONO" FUNCTION (4) &REMAIN STOP MODE.
2.
PRESS THE "INFO" FUNCTION AND THE LCD DISPLAY WILL SHOW THE DEFAULT BITRATE (128 KBPS)
3.
PRESS SKIP
OR
4.
PRESS AGAIN THE "INFO" BUTTON TO CONFIRM THE SETTING AND THE LCD DISPLAY (2) RESUME TO
"PHONO" MODE
FILE DELETE AT USB/SD CARD (BY REMOTE CONTROL)
1.
PRESET AT "USB" OR "SD" MODE.
2.
PRESS THE "DELETE" BUTTON AND THE LCD DISPLAY (2) WILL SHOW (DEL ---001)
3.
PRESS SKIP FORWARD
DELETE
4.
PRESS THE "REC" BUTTON TO ENTER "YES / NO" MODE AND THEN PRESS SKIP FORWARD
SKIP BACKWARD
5.
PRESS THE "REC" BUTTON AGAIN TO CONFIRM DELETE.
REMARK:
-
PRESS "STOP" BUTTON ONCE AT REMOTE HANDSET TO QUITE DELETE MODE.
REC" BUTTON (3) AGAIN TO CONTINUOUS THE PROCESS.
REC" BUTTON (3) DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL
STOP
" (TRACK SEPARATION) BUTTON ONCE AT REMOTE HANDSET DURING
BUTTONS (17) TO SELECT THE DESIRED BITRATE FOR ENCODING.
OR SKIP BACKWARD
TO SELECT "YES"
OR DOWN
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
STOP
"BUTTON (13) DURING RECORDING MODE.
REC" BUTTON (3) DIRECTLY.
" AND FLASHING. ENCODING IS START TO PERFORM.
"BUTTON (13) UNTIL THE ICON ON LCDDISPLAY (2)
BUTTON(17) TO SELECT THE FILE GOING TO
GB- 6
" BUTTON (17) TO SELECT
OR
Werbung
Inhaltsverzeichnis
