Eldat Easywave Fon Alarm Bedienungsanleitung Seite 39

Battery, wristband transmitter
The wristband transmitter is provided with a battery control function which
monitors the capacity of the battery during a transmission process. If the
LED flashes while the button is pressed or the LED does not light up at all,
the battery must be replaced.
The wristband transmitter is splashproof. To ensure it remains so after
changing the battery, we recommend you have the battery changed at
your sales outlet or by a specialist.
Programming more wristband transmitters
Other Easywave products, such as the RT27 necklace transmitter, RT28
pushbutton transmitter or fall mats, can also be used as transmitters.
A maximum of eight transmitters can be programmed in the telephone
(refer to Page 26).
When 8 transmitters are already programmed, programming another
causes the first transmitter to be overwritten.
Deleting programmed transmitters
The delete function deletes all the transmitters which have been pro­
grammed.
1. Press the PTx button on the underside of the phone until the LED
flashes quickly.
2. Release the PTx button.
3. Press the PTx button again, longer than 4 seconds, until the LED
lights up continually.
The LED goes out after 4 seconds and the programmed transmitters are
deleted.
Wristband Transmitter
39