Telephoning - Eldat Easywave Fon Alarm Bedienungsanleitung

Telephoning

5 Telephoning
Taking a call
{ì}, è or ™
Ending a call
™or é
Making a call
ë
•
è or ™
It is also possible to pick up the receiver first to obtain the dialling
tone. The digits then entered are dialled immediately. It is not
possible to correct wrong digits individually using this dialling
procedure.
Redialling
Your telephone stores the last phone number dialled.
è or ™, £
Calling back missed calls
The telephone stores the numbers of the last 64 calls received in a calls
list.
c
y or z
è
Dialling phone numbers from the phone book
Phone numbers must have been stored in the phone book for this function;
. Page 34.
¤
y or z
30
Take the call
End the call
Enter the phone number
(max. 22 digits)
Following incorrect input, press to
delete the last digit
Dial the phone number
Dial the last number dialled
Open the calls list
Select the entry required
Dial the number
Open the phone book
Select the entry required
Dial the number
One-touch dialling buttons
The one-touch dialling buttons M1, M2 or M3 can be used for normal one-
touch dialling or as memory locations for automatic emergency call dial­
ling. Be sure to store phone numbers for one-touch dialling first;
. Page 37.
^, _ or `
è or ™
Further information on automatic emergency calls; . Page 37.
Chain dialling
The chain dialling function is used in more complex telephone services,
e.g. for telephone banking, call-by-call or calling card procedures. Several
numbers stored in the phone book can be transmitted when a connection
has already been established. It is also possible to combine numbers for
transfer from the phone book with numbers entered manually. Numbers
stored in the phone book can be chained and transmitted as required.
¤
y or z,
Setting the receiver volume
You can adjust the receiver volume using a rotary knob when the +40 dB
amplification is activated.
Increasing the receiver volume to +40 dB
The receiver volume can be increased to +40 dB by pressing the left-hand
volume button.
Ý
Press the required quick dial button
Dial the number
Open the phone book when a
connection has been made
Select the phone book entry and
transmit the number
Adjust the volume with the knob
Increase the receiver volume