Cleaning And Maintenance; Appliance Front And Control Panel; Interior Of The Crockery Warmer; Mat With Non-Slip Surface - Electrolux WS 210 Benutzerinformation

Cleaning and Maintenance

Cleaning is the only maintenance action
that is required normally.
Warning! Cleaning must be done with
the crockery
from the electrical
Remove the plug from the power
socket or disconnect the crockery
warmer power supply circuit.
Do not use aggressive or abrasive
cleaning products, abrasive sponges or
pointed objects
abrasion marks may appear.
Do not use high pressure or steam jet
cleaning appliances.

Appliance front and control panel

The crockery warmer can be cleaned
using just a damp cloth. If it is very dirty,
add a few drops of washing-up liquid to
the washing water.
Wipe the surfaces dry using a dry cloth.
For stainless steel fronted crockery
warmers, special products for treatment
of stainless steel surfaces can be used.
These products prevent the surfaces
becoming dirty again for some time. Apply
a thin layer of such a product on the
surface using a soft cloth.
warmer disconnected
power supply.
since stains
On aluminium
warmers use a gentle glass cleaning
product and a soft cloth that does not
release fluff. Wipe horizontally without
pressing on the surface since aluminium is
sensitive to scratches and cuts.

Interior of the crockery warmer

Clean the inside of the crockery warmer
regularly using a damp cloth. If it is very
dirty add a few drops of washing-up liquid
to the washing water.
or
Wipe the surfaces dry using a dry cloth.
Avoid water entering through the air
circulation opening.
Only use the crockery warmer again when
it is completely dry.

Mat with non-slip surface

The non-slip surface mat can be removed
to facilitate cleaning of the drawer.
The mat can be cleaned by hand using hot
water with a few drops of washing-up
liquid.
Dry thoroughly.
The non-slip mat should only be replaced
when it is completely dry.
electrolux 51
fronted crockery