Cleaning And Maintenance; Interior Of The Crockery Warmer; Appliance Front And Control Panel - Electrolux WS200SL Gebrauchsanweisung

58 WWW.ELECTROLUX.COM

CLEANING AND MAINTENANCE

Cleaning is the only maintenance action
that is required normally.
WARNING!
Cleaning must be done with the crockery
warmer disconnected from the electrical
power supply. Remove the plug from the
power socket or disconnect the crockery
warmer power supply circuit.
Do not use aggressive or abrasive
cleaning products, abrasive sponges or
pointed objects since stains or abrasion
marks may appear.
Do not use high pressure or steam jet
cleaning appliances.
Appliance front and control
panel
The crockery warmer can be cleaned
using just a damp cloth. If it is very dirty,
add a few drops of washing-up liquid to
the washing water.
Wipe the surfaces dry using a dry cloth.
For stainless steel fronted crockery
warmers,
special products for treatment of
stainless steel surfaces can be used.
These products prevent the surfaces
becoming dirty again for some time.
Apply a thin layer of such a product on
the surface using a soft cloth.
On aluminium fronted crockery warmers
use a gentle glass cleaning product and
a soft cloth that does not release fluff.
Wipe horizontally without pressing on the
surface since aluminium is sensitive to
scratches and cuts.

Interior of the crockery warmer

Clean the inside of the crockery warmer
regularly using a damp cloth. If it is very
dirty add a few drops of washing-up
liquid to the washing water.
Wipe the surfaces dry using a dry cloth.
Avoid water entering through the air
circulation opening.
Only use the crockery warmer again
when it is completely dry.
Anti-slipt mat
The non-slip surface mat can be
removed to facilitate cleaning of the
drawer.
The mat can be cleaned by hand using
hot water with a few drops of washing-up
liquid. Dry thoroughly.
The non-slip mat should only be replaced
when it is completely dry.