Promate polyMax-10 Bedienungsanleitung Seite 5

2. Charging polyMax-10 back-up battery
• Connect one end of the Micro-USB Cable to polyMax-10's Micro-USB Input Port
and the other end to a Desktop/Laptop or a USB Power Adapter. The Battery Level
LED Indicator's will light up indicating that the back-up battery is charging normally.
3. Charging USB chargeable devices using polyMax-10
• There are two ports available on polyMax-10. Use the 1A USB Output Port to
charge smartphones and the 2.1A USB Output port to charge small tablets. Plug
the USB cable into the required USB Output Port on polyMax-10 and the other end
into the device you wish to charge. polyMax-10 would automatically start charging
the connected device. You can also charge two devices at the same time.
English
4