Statement 1019-Main Disconnecting Device; Statement 1021-Selv Circuit; Statement 1022-Disconnect Device; Statement 1027-Class 1 Led Product - Cisco 350X Series Bedienungs- Und Sicherheitshinweise

Statement 1019—Main Disconnecting Device
Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device.
Statement 1021—SELV Circuit
Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage
(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports
both use RJ-45 connectors. Use caution when connecting cables.
Statement 1022—Disconnect Device
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Warning
Statement 1027—Class 1 LED Product
Class 1 LED product.
Warning
Statement 1040—Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1047—Overheating Prevention
To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
Warning
ambient temperature of : 104°F (40°C)
Regulatory Compliance and Safety Information—Cisco 350X Series Managed Switches
6
Regulatory Compliance and Safety Information—Cisco 350X Series Managed Switches