CAME BPT TA/450 Montage- Und Betriebsanleitung Seite 30

B
N.B. Although the zone is excluded from the control, the frost protection feature is still
active.
Programming the frost protection temperature.
Activating a programmed temperature level (comfort, eco, night)
A
Once you have chosen the desired program, the screen will display the temperature
associated with the selected program for 2 seconds before going back to showing the
OFF mode
When the icon lights up and
the ambient temperature disap-
pears for 5 seconds, this confirms
that the thermal zone has been
excluded from system control B.
Press the button.
The display shows the default frost
protection temperature (3 °C).
The buttons allow you
to vary the programmed frost
protection temperature at a value
between 3 and 16 °C.
Press the button to exit and
save the set data.
Press the button to choose
one of the three programmed
temperature levels.
Each time the button is pressed,
the screen will cycle through
the name of the program being
activated:
A
-
- B