Using AirQuad
See fig. b
➤ Install the mounting and fastening frame.
➤ After installation, check the roof window functions properly.
➤ Tighten the screws 10 minutes after installation.
7
Using AirQuad
NOTICE! Risk of damage due to a build-up of heat between
A
the roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of
the way.
See fig. c to fig. f
8
Maintaining and cleaning AirQuad
NOTICE!
A
Do not use any sharp or hard objects for cleaning since they may
damage the acrylic glass.
Only use cleaning agents that are approved by the manufacturer.
Acrylic glass polish (item no. 9104100242), special polishing cloth
(item no. 9104100243) and acrylic glass cleaning agent (item no.
9104100244).
NOTE
I
The roof dome clouds over in bright sunshine. It becomes clear
again as soon as it cools down.
➤ Clean the roller blind with mild soap and plenty of water.
➤ Put talcum powder on the rubber seal.
14
AirQuad