Safety; Storage And Maintenance; Packaging & Storage; Maintenance - Bernard Controls AQL Range Kurzanleitung

1 SAFETY

This device complies with current applicable safety standards.
Installation, maintenance, and use of this unit require a skilled and
trained staff.
Please carefully read this whole document before mounting and
starting-up the actuator.

2 STORAGE AND MAINTENANCE

Packaging & Storage
The AQL actuator is delivered in a cardboard box equivalent to the
size of the actuator and sits in a cardboard wedge.
It should be stored under a shelter, in a clean and dry place and
protected from wide temperature variations.
•
Avoid placing the actuator directly on the floor.

•
Check that cable entries' plugs are correctly tightened.
•
Check that cover screws are correctly tightened.
What to check after storage
1. Visually check the electrical equipment.
2. Operate the actuator manually.
What to check on pre-installed actuators
If you expect a long period between actuator mounting and electrical
wiring:
1. Visually check that cable entries and cover are tightly closed.
2. In case of outdoor installation, cover the unit with a plastic
protective film.

Maintenance

This actuator features lifetime lubrication and does not require any
specific maintenance. If it operates in a very wet atmosphere, you
are advised to check once a year that there is no condensation build-
up inside the unit.
English
4