Cleaning And Storage; Technical Data; Guarantee - Clatronic ae 3053 Bedienungsanleitung

WARNING:
Never press the food with your hands into the fi lling
aperture. Always use the tamper supplied.
9. Switch on the device. Press the fruits lightly with the stopper.
10. There are 2 speeds available.
11. For removing the juice at an even speed (continuous opera-
tion):
During operation on levels 1 and 2 the switch locks in the
respective position.
Level 1 = low speed
Level 2 = high speed
For pulse mode:
shift the switch to „0" position. The switch snaps into place.
The appliance is off now. Turn the switch now to position
„P". The switch must be kept in this position for the desired
interval. When the switch is released, it returns automatically
to „0" position.
In order to switch off the device, turn the switch back to „O".
CAUTION:
Do not use the device for more than one minute without
interruption!
12. The juice now fl ows into the vessel. The fl esh of the fruit is
collected in the pomace container.
CAUTION:
In order to avoid malfunctions please do not overfi ll the
juice container.
13. Before removing the vessel, press the spout upwards in
order to close the outlet of the juice container and avoid
drips.
14. In order to release the attachment, press the two safety
catches at the same time and then lift the attachment off.

Cleaning and storage

• Before cleaning remove the mains lead from the socket.
• Never immerse the housing with motor in water!
• Do not use any sharp or abrasive detergents.
Motor Housing
Only a damp rinsing cloth should be used to clean the outside
of the housing.
Tamper, cover, centrifuge fi lter, centrifuge housing, pulp
container, juice container
CAUTION:
The plastic components are not suitable for cleaning in the
dishwasher. When subjected to heat and caustic detergents
they might become deformed or discoloured.
• Components that have come into contact with food can be
cleaned in soapy water.
• Please use a rinsing brush to clean the centrifuge fi lter.
05-AE 3053 25
WARNING:
the centrifuge sieve is very sharp! Danger of injury!
• Allow the parts to dry thoroughly before reassembling the
device.
Troubleshooting
Device is not working.
Remedy:
Check the mains connection.
Check the position of the switch.
Other possible causes:
The device is fi tted with a safety switch (11).
This prevents the motor from starting up unintentionally.
Remedy:
Check that the centrifuge fi lter and cover are correctly positio-
ned.

Technical Data

Model: ..............................................................................AE 3053
Power supply:................................................220-240 V, 50/60 Hz
Power consumption:............................................................ 800 W
Protection class:........................................................................... Ι
Short operation time:............................................................1 Min.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
25
25.04.2006, 9:55:59 Uhr