Herunterladen Inhalt Inhalt Diese Seite drucken

Initial Operation - WMF Bueno Bedienungsanleitung

Wasserkocher 1,7 l
Vorschau ausblenden Andere Handbücher für Bueno:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
The on/off switch only
functions when the kettle is
standing on the base unit.
Do not use the first quantity
of boiled water for food
preparation.
▪ Do not move the appliance during operation and do not pull at the
power cable.
▪ Caution. The appliance becomes very hot. Risk of scalding due to
emerging steam. Hold the hot kettle only by its handle and do not
open the lid to pour out the water.
▪ Always empty the kettle completely. Do not leave residual water in
the appliance over a longer period.
▪ This appliance is not intended to be used by persons (including
children) with limited physical, sensory or intellectual faculties or
who lack experience and/or knowledge, unless they are supervised
by a person responsible for their safety or have received instruc-
tions on how to use the appliance.
▪ Please make sure that children do not have an opportunity to play
with the appliance.
▪ Pull the power plug:
if faults arise during operation,
prior to each cleaning and service,
after use.
▪ Do not immerse the kettle or the base into water.
▪ In the case of misuse, wrong handling or incorrect repair no
liability will be taken for possible damages.
Also, guarantee services are excluded in such cases.
▪ Packaging material e.g. plastic bags should be kept out of the reach
of children.
▪ If the power cable of the appliance is damaged, it must be replaced
by the manufacturer's authorised service agent or a qualified
technician. Incorrect repairs may result in considerable hazards for
the user.

Initial operation

Clean the inside of the kettle thoroughly before using it for the first
time. To do this, open the lid as shown in the picture.
A strainer in the pouring spout ensures that large pieces of limescale
are filtered out when pouring.
The part of the connection cable which is not required can be wound
up in the base unit.
Connect the mains plug to an earthed socket.
Fill with as much water as needed to be able to see the level on the
water level indicator, although do not go above the Max mark. Close
the lid. Only in this way will the automatic boil-stop function work
reliably.
Place the kettle in any position on the base unit. Only after this has
been done can you press downwards on the on/off switch under the
handle.
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis