Electrolux FQ945XE Benutzerinformation Seite 13

IMPORTANT
An end time can still be set while the oven
is in use. Follow the instructions above to
do so (in that case the oven function and
temperature do not have to be reset).
You can check the end time of the baking
process whenever you wish by holding
the time button (A) in for a few moments.
If you want to change the end time, you
should cancel the function by
simultaneously pressing the
buttons. Then set an end time again.
6.9 Setting baking time and end
time
1. Hold the time button (D) in for a few
moments till you hear a beep. If the
time button (D) is then pressed again,
the word time appears in the display.
2. Set the baking time using the
buttons.
3. Press the time button (D) again till the
word End appears in the display.
4. Set the end time with the
buttons.
You will hear a beep, the current time
appears and the AUTO symbol stays
lit.
5. Set a baking function and
temperature.
The oven remains switched off, with the
AUTO symbol in the display. The oven
has been programmed.
The oven starts when the baking process
should begin and bakes for the baking
time set. The AUTO symbol and the
baking symbol are lit in the display.
and
PLEASE NOTE
The time at which the baking process
starts is the end time minus the baking
time. For example: the end time is set to
5:00 PM and the baking time is 2 hours.
and
In that case the oven will switch on at
3:00 PM!
The oven will be switched off and an
and
acoustic signal will go off once the baking
time programmed has elapsed.
6. Press any key to switch off the
acoustic signal.
The oven remains switched off and
the AUTO symbol flashes.
7. Hold the time button (D) in for a few
moments till you hear a beep to end
the function. Turn the oven function
knob and temperature knob to the off
position to switch the oven off.
You can check the baking process
whenever you wish by holding the time
button (D) in for a few moments.
ENGLISH 13