Inhaltsverzeichnis
Werbung
en
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Temperature differs
greatly from the set
value.
Interior light does not
function.
The interior light glows
at a reduced luminosity
when the door is almost
closed (or light switch
depressed).
32
Possible cause
The bulb is defective.
Light switch is sticking.
Fig. 0/A
Ambient temperature is
below 20 °C. Not a fault!
Remedial action
In some cases it is adequate to switch off the
appliance for 5 minutes.
If the temperature is too high wait
a few hours and check whether the
temperature has approached the set value.
If the temperature is too low check
the temperature again the next day.
Change the bulb Fig 0/B
1. Pull out the mains plug or disconnect
the fuse.
2. Slide cover grille forwards and remove.
3. Change the bulb.
(Replacement bulb, 220-240 V a.c.,
E14 bulb holder, see defective bulb
for wattage)
Check whether it can be moved.
Werbung
Inhaltsverzeichnis
