Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
Operator Safety (Cont.)
Injury to the operator or
bystanders could occur if the
machine is plugged in while
performing maintenance,
servicing, changing filter, or
inspecting. Always unplug
machine when not in use.
DO NOT use solvents or other
flammable products to clean
this machine.
Dry use only. DO NOT use for
liquid recovery, which could
result in motor failure, electric
shock, and electrocution.

Storage

It is advisable to store the machine in its original
packaging. Doing so makes it possible to form a
column of two packages maximum, with one on
top of the other.
If the machine is removed from the original
packaging and is not used for some time ensure
the wheels and drum are not in contact with
the ground. In this case use two supports at
least 50mm in height to rest the machine on,
ensuring contact is with the base frame.
6 6
Airborne sanding dust should not be breathed in while operating a sanding
machine. Always wear an approved particulate respirator while operating
sanding equipment.
Injury to the eyes and or body can occur if protective clothing and or
equipment is not worn while sanding. Always wear hearing protection, and a
dust mask while sanding.
Exposure to high noise levels can cause hearing loss or impairment. Wear
EN-ISO approved hearing protection (earmuffs) when using this equipment.
Bodily injury could occur if power is supplied to the machine with the power
switch already in the "ON" position. Always check to assure the power
switch is "OFF" before connecting the machine to its power source.
DO NOT use this machine to sand steps or furniture. DO NOT ride on this
machine.
DO NOT put any objects into openings. DO NOT use with blocked openings.
Keep free from dust, lint, hair or anything that may reduce airflow.
This equipment is for dry use only and must not be used
or kept outside in wet conditions. Store the machine in a
dry building, otherwise the machine could be damaged.
Storage temperature from -20°C to 50°C.
Bona Belt Lite Manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis