Kunzle & Tasin Bona Belt Lite Bedienungsanleitung Seite 21

Starting the Machine (Cont.)
8.
Tighten the drum using the
drum tensioning lever (A).
11.
To start the machine: Stand behind the handle, then...
Turn the knob on
the switch from
"0" to "START"
Only use 750mm x 203mm abrasive belts.
9.
Connect the plug to the
socket.
Hold in this position until
the motor has reached a
sufficient rotation speed
10.
Ensure the lever (A) is
lowered and drum is raised
from the floor.
Release the knob, which will
automatically return to work
position "1"
Bona Belt Lite Manual
21 21
EN