Machine Data Plate; Commencing Operation; Instructions For Assembly Following Transportation - Kunzle & Tasin Bona Belt Lite Bedienungsanleitung

Introduction (Cont.)

Machine data plate

The following information can be found on the machine data plate:
1) Machine model
2) Safety symbols
3) Motor power
4) Frequency
5) Supply voltage
6) Country of manufacture

Commencing Operation

Instructions for assembly following transportation

To re-assemble the machine after transportation, proceed as follows:
1.
Open the belt guard after turning
the screw counter-clockwise.
7) Year of manufacture (see 9)
8) Name of the manufacturer
9) Serial number:
• The first two numbers refer to the year of manufacture
(14 = 2014)
• The second group of three numbers indicates the day of
the year the machine was manufactured (127 = May 7th)
• The last two numbers indicate the progressive number of
machines produced that day of manufacture
(13 = 13th machine produced that day)
2.
Position the motor in its
housing.
Bona Belt Lite Manual
11 11
EN