Assembly Instructions; Step 1: Installing The Wheels - P.Lindberg 9032388 Original Bedienungsanleitung

Assembly Instructions

STEP 1: Installing the Wheels

1. Slide the axle bushing and the wheel spacer onto the left side of the axle.
2. Push the left wheel onto the axle.
3. Slip the flat washer Ø16 onto the axle, then insert the cotter pin Ø5x35 through the
hole in the axle. Secure the wheel by bending the cotter pin Ø5x35.
4. Slide the axle bushing and the wheel spacer onto the right side of the axle.
5. Install the wheel and the spacer into the axle, swivel the two holes until they line up,
insert the drive pin through sleeve and lock.
6. Slip the flat washer Ø 16 onto the end of the axle, then insert the cotter pin Ø5x35
through the hole in the axle. Secure the wheel by bending the cotter pin Ø5x35.
P. Lindberg A/S
Tlf: 70212626
5
Sdr. Ringvej 1
DK-6600 Vejen
MAN 9032388 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk