Preparing The Remote Controller - DJI Mavic 2 Enterprise Kurzanleitung

4. Preparing the Remote Controller

Unfold the antennas and mobile device clamps,
then attach the control sticks.
Place one end of the RC cable to the
end of the slot.
Attach your mobile device within the clamps.
Ensure the control sticks are firmly mounted.
The remote controller cable with the Lightning connector is mounted by default. Use the
appropriate cable for your mobile device to connect to the remote controller. When using
an iPad or tablet, use the USB port on the remote controller.
Do not use the Micro USB and the USB ports simultaneously for linking video.
6
1
Strong
Weak
Set the antennas parallel to each other
Optimal Transmission Range