DJI Mavic 2 Enterprise Kurzanleitung Seite 9

5. Preparing for Takeoff
Power on the remote controller
Use your DJI account to activate the aircraft. Activation requires an internet connection.
Internet
Set a password for the aircraft in the DJI Pilot app to ensure secure access and
protect your onboard data.
6. Flight
Before taking off, make sure the Aircraft Status Bar
in DJI Pilot displays "Ready to Go".
Manual Takeoff / Landing
Combination stick command to
start/stop the motors
Left stick up (slowly)
to take off
The motors can only be stopped mid-flight when the flight controller detects critical
error.
Power on the aircraft
Left stick down (slowly) until you touch the
ground
Hold a few seconds to stop the motors
DJI Pilot
App
Launch DJI Pilot
Ready to Go (GPS)
OR
7