Use - Klarstein Steam bro Bedienungsanleitung

EN
24

USE

CAUTION! Although the iron has an automatic safety switch-off function, you
should still pull the mains plug out of the plug socket after ironing or during any
prolonged pauses in order to prevent personal injury or damage to property.
Never leave the iron unattended while it is connected to the mains power and
keep children away from it.
• Never attempt to iron clothes while somebody is wearing them.
• Never aim the steam directly at people, animals or plants. This can cause severe
scalding.
• Danger of injury! Only hold the device by the handle when you are operating it.
• Only iron on a stable, flat, heat-resistant and moisture-resistant surface. We recom-
mend that you use a standard ironing board.
• Do not iron on surfaces made from glass or plastic.
• Always work with sufficient lighting.
• Always test the device first on a small, inconspicuous spot on the clothing.
• Be aware of damage caused by fire! Never iron on one spot for too long. Never
leave the hot bottom of the iron standing on the fabric or another heat-sensitive
surface!
• Do not iron over zips, studs, clips etc. to prevent any scratching of the ceramic coat-
ing on the bottom of the iron.
• Open the water reservoir cover only to fill the water reservoir. Otherwise keep the
cover closed while operating the iron.
• Place the device on an even, stable and heat-resistant surface during and shortly
after use. Always place the device upright on its base to prevent damage to the sur-
face which could be caused by the hot bottom section of the iron.
NOTE: You might notice a slight odour the first time you use the device. This is
harmless and will cease as you use the device.
Filling the Water Reservoir
CAUTION! Always pull out the mains plug before you top up/empty the
water reservoir. Always pull the plug and never the cable. Never pour any
cleaning agent or other additives into the device. This could destroy the device
and safe working is no longer guaranteed. The water reservoir may be filled
with a maximum of 300 ml water to avoid overflowing. The useful service
life of the device will be extended if you use pure distilled water.