Konig Electronic SEC-CAM250 Anleitung Seite 5

> AGC
RANGE CTRL
AE PREFS
SHUTTER LIMIT
LOW LIGHT
RETURN.
AGC:
RANGE CTRL:
AE PREF's:
SHUTTER LIMIT:
LOW LIGHT:
RETURN:
9) Select RETURN in the ADVANCED SETTING menu and push the MENU button to return to the MAIN MENU.
10) Select SYSTEM INFO in the MAIN MENU and push the MENU button to enter.
SYSTEM INFO
> SW Rev: v1.0
RESTORE FACTORY SETTINGS.
RESET CAMERA
RETURN.
SW Rev: v1.0:
RESTORE FACTORY SETTINGS.
RESET CAMERA
RETURN.
11) Select RETURN in the MAIN MENU to enter the EXIT MENU.
12) Select EXIT WITHOUT SAVE if changes and adjustments are not needed to be saved.
13) Select EXIT WITH SAVE if changes and adjustments need to be saved.
14) Select RETURN to return to the MAIN MENU.
15) Select EXIT in the MAIN MENU and push for a few seconds the MENU button to close the MAIN MENU.
Specifications:
• Image chip:
• Horizontal resolution:
• Light sensitivity:
• Lens mount:
• Electronic shutter:
• Automatic iris connection:
• S/N ratio:
• White balance:
• Gain:
• Gamma correction:
• Working temperature:
• Video out:
• Voltage:
• Dimensions:
• Weight:
EXPOSURE
MEDIUM
NORMAL
HIGHLIGHTS
X2..
ESS
Select MEDIUM, HIGH or LOW
Select NORMAL, HIGH or LOW
Select HIGHLIGHTS or SHADOWS
Select SHUTTER LIMIT, X2, X4, X8, X16, X32, CUSTOM
Select ESS, NON-ESS, B/W ESS
Return to ADVANCED SETTING menu
Software version
Restore original factory settings
Reset (restart) camera
Return to MAIN MENU
1/3"Pixim CMOS
540 TV lines
Min 0.5Lux/F1.2
CS
1/50~1/100000sec
DC
>52dB
Auto
ON/OFF
>0.45
-10°C~50°C
BNC / <1.2Vp-p/75 Ohm
12V DC
120×67×62 mm
340g
5