Konig Electronic SEC-CAM250 Anleitung Seite 2

Introduction:
Professional camera with an ultra wide dynamic range (WDR) which even under extreme light conditions
provides a sharp and colour-saturated view. The 1/3" CMOS image sensor with Pixim DPS-technology (Digital
Pixel System ) guarantees a true picture quality. The DPS chip converts the light for each pixel in to a digital
®
signal so that for each pixel it is possible to achieve independent exposure time. This camera is perfect for
spaces where a detailed view is impossible due to heavy light exposure or twilight. It is the perfect solution for
tough light conditions like dazzle and strong backlight. The built-in OSD menu offers the possibility to set the
camera for all kind of lighting conditions.
Camera Description:
1. Connection for auto iris lens
2. Power indicator
3. BNC video output
4. MENU buttons
5. 12V DC connection
6. Back focus (focus adjusting ring)
Operation MENU:
1) Push the MENU button for a few seconds to open the MAIN MENU.
2) Use the MENU button to enter the SUB MENUS and left, right, down and up buttons to navigate the menus.
> LANGUAGE
WDR MODE
ADVANCED SETTING.
SYSTEM INFO.
EXIT.
LANGUAGE:
WDR MODE:
ADVANCED SET:
SYSTEM INFO:
EXIT:
3) Select ADVANCED SETTING and push the MENU button to enter.
ENGLISH
MAIN MENU
ENGLISH
NORMAL.
Choose the menu language, Chinese or English.
Preset operation modes: Normal, Indoor, Outdoor,
Fluor 1 (sufficient light), Fluor 2 (dark)
Setting of lens, display, white balance, etc.
System version number setting
Exit menu with or without saving
2