Herunterladen Inhalt Inhalt Diese Seite drucken

auna multimedia TCRD-993C Betriebs-/Sicherheitshinweise Seite 20

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Press the " erase " button(24) at cd stop mode & display will show "unf in-d" then press the " play/
pause " button to start erasing and " busy " disappear on the lcd (2)
After finish the unfinalized display will show total track nr. And total playing time of th e disc and
" no toc" indicator will appear
B) erase one track
Set at cd function mode and place the unfinalized cd-rw disc you would like to delete the track.
Press the " erase " button(24) at cd stop mode & "er" and the last track nr. Appear on the lcd (2)
Press the " play/pause " button to start erasing the last track and " busy " disappear on the lcd
(2) .
After finish the track erasing display will show total track nr. And total playing time of th e disc
and " no toc" indicator will appear
Repeat step 5 and 7 to continous the erasing .
C) erase all track
Set at cd function mode and place the cd-rw disc you would like to delete the track.
Press and hold the " erase " button(24) at cd stop mode & repeatly until " erase all " appear on
the lcd (2).
Press the " play/pause " button to start erasing and display appear "busy" during earsing
The lcd (2) will show " 0000000 " to confirm the erase process is completed.
Remarks:
This operation cannot be undone.
The copy cd-rw disc from other system cannot be earsed one by one in this unit but may be earse
all is possible.
Cassette playback: The system will start the playback automatically after inserting of cassette tape
Stop / Eject: Press the " Tape forward / Eject " button completely inwards and the cassette tape will
be ejected though the cassette door cover. The " tape forward / eject " button will keeping at lowest
height position.
Fast forward: Press the " tape forward / Eject " button half inwards during Playback mode, the tape
winding forward direction. The " tape forward / eject " button will keeping at middle height position.
Slightly press the " Tape forward / Eject " button again to resume normal playback. The " tape forward
/ eject " button will resume to the highest position.
Remarks: Make sure the direction is correct when inserting the tape into the system. There is some
searching noise can be heard and the system cannot perform normal playback function during fast
forward mode. It is recommended to take out the cassette tape from the system every times after
listening and don't leave the cassette tape inside the system when not under playback mode.
20
Tape Deck: Cassette

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis