Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Random: Press RANDOM (on the RC) for a randomized playback of songs on the CD
•
Programmed play:
In SD/USB mode, press STOP, then PROG (19). Use
you confirm (add to playlist) by pressing PROG. You can add up to 32 tracks. Press Play/Pause to start
playback. Press Stop to end playback and delete the list.
Apart from the cd playback function, it can perform the cd recroding function either from phono / tape / aux
mode respectively. All the recroding track will be stored in audio-cd format:-
Before start, place a cd-r or cd-rw disc in the cd tray (6). The disc is able to record only if the lcd display
show NO TOC indicator.
•
Phono recoding
•
Select the function switch (20) to " source " position, then press the " phono " function button (13).
Place the recorded vinyl & get ready for playback.
•
Press "rec " button (23) and then the cd " play/pause " button (17) until the play indicator " "
show on lcd display (2).
•
After few seconds, the lcd (2) will show the time counter and now the system is start recording
process. Now start the playback of the vinyl at phono.
•
After completing of recroding, press the " stop " button (18) and then stop the playback of vinyl
•
Cassete recroding
•
Select the function switch (20) to " source " position, then press the " tape " function button (11).
Place the recorded cassette tape to the cassette slot(31) to get ready for playback.
•
Press "rec " button (23) and then the cd " play/pause " button (17) until the play indicator " "
show on lcd display (2).
•
After few seconds, the lcd (2) will show the time counter and now the system is start recording
process. Now push the cassette tape to the cassette compartemnt to start playback of which the
track you prepare to record.
•
After completing of recroding, press the " stop " button (30) and then stop the playback of the
cassette tape.
•
Aux-in recording
•
Select the function switch (20) to " source " position, then press the " aux " function button(14).
Connect the headphone output at the audio device (such as mp3 player, cd player etc) to the
3.5Mm aux-in jack (10) via a 3.5 Mm connecting cable (not provided).
•
Repeat the same procedurs from step 2 to 4 as described on other recroding model from above.
•
Adjust the volume output level at your audio player device if the recroding level is too high
18
Recording: Vinyl/Tape/AUX -> Audio-CD
/
to select desired tracks, each of which
Werbung
Inhaltsverzeichnis
