Werbung
Annex
Additional UL requirements
Installation
For a complete safe and vault installation connect to 'high security
cable'. This product shall be installed in accordance with The Ca-
nadian Electrical Code, Part 1, Safety Standard for Electrical In-
stallations.
Programming
The reduction of the sensitivity by the remote signal (terminal 7) is
not verified by UL.
Sensitivity settings verified by UL for Monolithic Concrete:
Minimum thicknessMaximum spacing
Meters
Feet
Meters
2.5
0.6
1.98
4.0
5.0
− For coverage of surfaces over corners, the recommended spac-
ing is reduced by 75%.
Sensitivity settings verified by UL for Modular Steel Panels:
Minimum thicknessMaximum spacing
Meters
Inches
Meters
1.0
0.015
0.6
1.5
2.0
− A detector shall be on each modular wall panel that is not con-
tinuously welded.
− For coverage of surfaces over corners, the recommended spac-
ing is reduced by 75%.
Sensitivity settings verified by UL for Steel Safes:
Minimum
Place-
thickness
ment
Meters Inches Meters Feet
Body
0.006
0.25
Door
Body
0.006
0.25
Door
Body
0.006
0.25
Door
− At least one detector is to be mounted on the door and at least
one detector is to be mounted on the body.
* Note: Shock sensitivity is defined as the sensitivity to single
impacts on the detector or its base. Only in
USER MODE, the shock sensitivity can be set inde-
pendently of Mode and Operating radius with the help of
the GMSW7 SensTool software. If one of the fixed DIP
setting is used, the shock sensitivity corresponds to
Mode and Operating radius as indicated in the tables
above.
008320_l_-_-
Anhang
Annexe
Mode and
Operating
Feet
radius
Concrete
8.2
2.5m
Concrete
13.2
4m
Concrete
16.5
5m
Mode and
Operating
Feet
radius
Steel
3.3
1 m
Steel
4.9
1.5 m
Steel
6.6
2 m
Maximum
Mode and
spacing
Operating
radius
Steel
1.0
3.3
1 m
Steel
1.5
4.9
1.5 m
Steel
2.0
6.6
2 m
Appendice
Omologazione IMQ CA12.00766
Specifiche tecniche
Livello di prestazione ....................................................II° livello
Temperatura di funzionato................................... +5° C...+40° C
Grado di protezione .............................................................IP30
l'assorbimento di corrente...................................................4 mA
immunità ai campi elettromagnetici10V/m−0.08 ...............2 GHz
Accessori non sono coperti dalla certificazione:
− set da incasso............................................................ GMXW0
− scatola da pavimento.................................................. GMXB0
Shock Sen-
− scatola impermeabile............................................ GMXWG0H
sitivity *
− Emisor de ensayo....................................................... GMXS1
− Generador externo de test.......................................... GMXS5
High
Accessori
− Disposizione di prova GMXS1 .....................................I° livello
High
− Piastra copritoppa GMXP3 GMXP3Z ..........................I° livello
High
Shock Sen-
sitivity *
Fixation
Low
Toutes les exigences relatives aux agréments nationaux et con-
cernant l'application du produit doivent être satisfaites.
Mid
Câblage du détecteur
Mid
Le câblage peut être réalisé avec du câble souple de 0,22mm ou
du câble de type SYT.
Accessoires
GMXD7 Feuille anti-perçage
Cette option n'est pas disponible en France.
GMXWO Jeu pour encastrement mural avec couvercle
Shock Sen-
mode de protection selon (EN60529)....................... .......IP51
sitivity *
capabilité max. de porter du couvercle........................... 25 kg
Low
GMXBO Boite de sol
Mid
mode de protection selon (EN60529)....................... .......IP51
capabilité max. de porter du couvercle................. ...... 1000 kg
Mid
Caractéristiques techniques
Tension d'alim: 8,0Vcc ....... 16Vcc; ondulation résidu..: 0,25 Vac
Bande de fréquences :........................................13 à 19 KHz
protection du boîtier (EN60529, EN50102) ...............IP43, IK07
Certification NFA2P type 3 N° 2730000340
N° d'attestation
GM760
GMXS1
GMXPO
GMXWO
GMXBO
GMXC2
GMSW7
Organisme certificateur :
CNPP: www.cnpp.com
AFNOR: www.afnor.org
- 13 -
Anexo
附件 ［附件］
Requisiti supplementari dell'IMQ
Exigences supplémentaires de NFA2P
273034-00
302302-02
302302-03
302302-08
302302-09
303303-02
273034-06
Werbung
