English - Kenwood AT511 Bedienungsanleitungen

English

AT511 for use on 2 If the clearance needs to be
adjusted, raise the mixer head and
Kitchen machine Chef
remove the tool.
Using the spanner provided loosen
AT512 for use on
the nut sufficiently to allow
Kitchen Machine Major
adjustment of the shaft
the tool closer to the bottom of the
and Cooking Chef
bowl, turn the shaft anti-clockwise.
To raise the tool away from the
bottom of the bowl turn the shaft
before using your Kenwood
clockwise. Re-tighten the nut.
attachment
Read these instructions carefully and 3 Fit the tool to the mixer and lower the
G
retain for future reference. mixer head. (Check its position see
point 2). Repeat the above steps as
Remove all packaging and any
G
necessary until the tool is set
labels.
correctly. Once this is achieved
G Wash the tool: see 'care and
tighten the nut securely.
cleaning'.
4 For best results use Minimum Speed
The folding tool is designed for
when folding and refer to the
folding light ingredients into heavier
recommended quantity chart.
mixtures for example meringues,
See the Kenwood website for recipe
mousses, fruit fools, Genoese
suggestions.
sponges, soufflés and to fold flour
into cakes mixes. It is not to be used
hints
with heavy recipes such as dough,
G Do not use a high speed as a low
creaming fat and sugar or all in one
speed is required to optimise the
cake mixes.
folding performance.
The tool is not designed to be used
G
safety
to mix hot ingredients, allow the
ingredients to cool before using the
Refer to your main Kitchen Machine
folding tool.
instruction manual for relevant safety
For best results do not over whisk
G
warnings.
egg whites or cream – the folding
tool will not be able to fold the
to use your folding tool
mixture correctly if the whisked mix is
too firm.
1 With the kitchen machine switched
Do not fold the mixture for too long
G
off, insert the folding tool and lower
as the air will be knocked out and
the mixer head. Check the position
the mix will be too loose. Stop once
of the folding tool in the bowl .
the mix is sufficiently incorporated.
Ideally the folding tool should be
almost touching the bottom of the
bowl.
2
. To lower