Setting Up Power Supply System - Topro Modena Betriebsanleitung

OPERATION

6.2 Setting up power supply system

The adjustment of the seating position is powered by an electric motor installed on the frame of
the chair. To adjust the seats connect the chair to you households electric outlet via the included
cable.
54
HINT!
The products power is on a short delay after connecting to a power supply.
Please wait approximately 20 seconds before operation.
HINT!
You can use all seating positions whilst the green operation light is on.
WARNING!
Take care not to squash, pinch or damage the power cord.
Be careful to avoid tripping over the electric cable.