Unpacking; Moving The Chair; Montage; Connections Of The Components - Topro Modena Betriebsanleitung

5.1.3 Unpacking

Improper opening of the package can damage the chair!
Open the package following these steps:
1. Place the box on the ground as indicated by the symbol on the box.
2. Flip the box to one side and open the bottom of the box.
3. Flip the four bottom parts completely to the outside.
4. Slowly flip the box back to its former position.
5. Lift the box off the chair.

5 1 4 Moving the chair

Take the length of the electric cable into account when moving the chair.
Disconnect it from the power outlet if necessary. Store the cable in the side pockets for moving.
HINT!
TOPRO participates in the recycling of the packaging material. Through
its participation TOPRO reduces the emission of greenhouse gasses.

5.2 Montage

The assembly is being done by the certified dealer on site.
HINT!
For ergonomically reasons TOPRO suggests the assembly is done by
two persons.
WARNING!
Risk of fatal injury from electric current!
The covers and enclosures must not be opened, removed or damaged.
The chair has to be disconnected from power during installation.

5 2 1 Connections of the components

Electric components
• Avoid creating obstructions or tripping points with the wire.
• Protect the cable from damage.
TRANSPORT & INSTALATION
49