Safety Symbols; General Safety Rules; Work Area Safety; Electrical Safety - RIDGID micro CM-100 Bedienungsanleitung

Safety Symbols

In this operator's manual and on the product, safety symbols and signal words are used
to communicate important safety information. This section is provided to improve un-
derstanding of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER
WARNING
CAUTION
NOTICE indicates information that relates to the protection of property.
NOTICE
This symbol means read the operator's manual carefully before using the equip-
ment. The operator's manual contains important information on the safe and
proper operation of the equipment.
This symbol indicates the risk of electrical shock.
This symbol indicates the presence of a high voltage hazard.

General Safety Rules

Read all safety warnings and in struc tions. Failure to follow the warn ings and in-
structions may result in electric shock, fire and/or serious injury.

Work Area Safety

• Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate equipment in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. E quip ment can create sparks which may ignite
the dust or fumes.
• Keep children and by-standers a way while operating equipment. Distrac tions can
cause you to lose control.

Electrical Safety

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an in creased risk of electrical shock if your body
is earthed or grounded.
• Do not expose equipment to rain or wet conditions. Water en tering equipment will
increase the risk of electrical shock.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating
equipment. Do not use equipment while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating equipment
may result in serious personal injury.
2
micro CM-100 Digital Clamp Meter
DANGER indicates a hazardous situation which, if not avoided, will re-
sult in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
SAVE THESE INSTRUCTIONS!
WARNING