Werbung
en_us | 47 | T10031
3 Operating Instructions
1.
Check the reception for completeness and visible
damages such as signs of wear, deformation,
breakages, cracks, and corrosion damages prior to
each use. Check all threads for damages and ease
of operation. Do no use the support when defects
are noted and discard it immediately.
2.
Carry out the necessary preparation work for the
use of the support in accordance with the
workshop manuals.
3.
Place the support on the engine and gearbox jack,
ensuring the support pin is inserted completely
into the receptacle of the engine and gearbox jack
and is secured.
4.
Attach and secure the support to the vehicle
component in accordance with the workshop
manuals of the Volkswagen Group brands.
5.
Mark the support elements in position with the
bolts and subsequently screw with the wing nut
WARNING
Risk of the load tilting or falling!
Incorrect attachment of the reception to the load
may cause tilting or falling of the load! This could
cause serious personal injury or severe damage to
materials.
Fasten the support exactly as described in the
workshop manuals.
Position the locking pin exactly and secure with
wing nuts
WARNING
Risk of injury through moving loads!
Crushing of limbs between load and vehicle can result
from movements such as moving, lifting, or lowering of
the load.
Position hands and feet in such a manner that
crushing hazards do not exist when moving the load.
Observe the engine and the gearbox jack as well as
the load during all movements.
6.
Carry out further work as described in the
workshop manuals.
7.
Ensure that all parts of the special tool have been
removed after completing the repair work.
2018-06-05
4 Inspection and Maintenance
Check the reception for completeness and visible
damages such as signs of wear, deformation,
breakages, cracks, and corrosion damages prior to
each use. Check all threads for damages and ease of
operation. Do no use the support when defects are
noted and discard it immediately.
Spare parts are available on request. Only use
original replacement parts.
Please contact your 1st level support representative
with any queries.
NOTICE
Modifications to this product which have not been
expressly approved by the manufacturer will void any
warranty. The manufacturer assumes no liability for
personal injury or damage to materials which occur as
the result of improper use of this product.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Werbung
Kapitel
