Before You Begin - DJI OSMO Pocket Haftungsausschluss Und Sicherheitsvorschriften

read and follow all of the instructions and warnings in the user manual,
prior to assembly, setup or use, in order to operate the product correctly
and avoid damage or serious injury.

Before You Begin

The following documents have been produced to help you safely operate and
make full use of your Osmo Pocket:
Osmo Pocket Disclaimer and Safety Guidelines
Osmo Pocket Quick Start Guide
Osmo Pocket User Manual
Check that you have all of the included parts. Read the entire user manual
and watch the tutorial videos on the product page of the official DJI website
(http://www.dji.com/osmo-pocket). Read the Disclaimer and Warning
above to understand your legal rights and responsibilities. If you have any
questions or problems during the installation, maintenance or use of this
product, please contact DJI OSMO or a DJI OSMO authorized dealer.
Safety Guidelines
1. DO NOT allow the product to come into contact with any kind of liquid. DO
NOT leave product out in the rain or near a source of moisture. DO NOT
drop the product into water. If the inside of the battery comes into contact
with water, chemical decomposition may occur, potentially resulting in the
battery catching on fire, and may even lead to an explosion.
2. Put out any product fire using water, sand, fire blanket or a dry powder fire
extinguisher.
3. The product should be used in temperatures from 0℃ to 40℃. Use of the
product in environments above 40℃ can lead to a fire or explosion. Use of
product below 0℃ can lead to permanent damage.
4. Never disassemble or pierce the product in any way or the battery may leak,
catch fire, or explode.
5. DO NOT drop or strike the product. DO NOT place heavy objects on the
product.
6. DO NOT heat the product. DO NOT put the product in a microwave oven or
in a pressurized container.
7. DO NOT leave the product near heat sources such as a furnace or heater.
DO NOT leave the product inside of a vehicle on hot days. The ideal storage
temperature is 22℃-28℃.
8. DO NOT store the product fully discharged for long periods of time, otherwise
it will over discharge and lead to permanent damage.
1. Intricate components inside the Osmo Pocket may be damanged upon
impact and cause the gimbal to malfunction.
2. Ensure there is nothing obstructing the gimbal when the Osmo Pocket is
powered on.
3. The Osmo Pocket is not water resistant. DO NOT use any liquid cleansers.
Only use a soft dry cloth to clean the Osmo Pocket.
4. Keep the Osmo Pocket away from sand and dust to safeguard the sensors
in the motors.
3