Technische Daten; About This Documentation - Aventics SPM Betriebsanleitung

AVENTICS | SPM | R412026734-BAL-001-AB | Deutsch/English
8

Technische Daten

Allgemeine Daten
Abmessungen 112 mm x 100 mm x 45 mm
Gewicht < 270 g
Schutzart IP20, Industriegehäuse für 35-mm-
Tragschienenmontage
Elekrische Eigenschaften
Spannungsvers 12...24 V DC
orgung Die Spannungsversorgung muss aus einem
Netzteil mit sicherer Trennung erfolgen.
Leistungsaufna < 6 W
hme
Elektrische Schnittstellen
Ethernet 1 x 10/100/1000 Mbps mit Auto MDI-X (LAN 2,
RJ45)
1 x 10/100 Mbps (LAN 1, RJ45)
USB 1 x USB 2.0 Host
Software
Betriebssystem Embedded Linux, Kernel Version 2.6
Programmieru Node RED
ng für Nodes für AV-Ventilsystem
Internet of
Things
IP-Adressen Static, DHCP, AutoIP, UPnP
Protokoll-Stack TCP, UDP, Telnet, FTP, HTTP, TFTP, MQTT, OPC
UA
Sicherheitsprot SSL/SSH, HTTPS, TLS 1.2, OpenVPN, IPsec
okolle
Firewall netfilter + iptables
Weiteres DynDNS-Support
Firmware-Update über WebUI
English
1

About this Documentation

Documentation validity
This documentation applies to the Smart Pneumatics Monitor
(SPM, R419801689).
The documentation is intended for installers, programmers,
electrical engineers, service personnel, and system owners.
O
Read this documentation completely, especially the chapter 2
"Notes on safety" before working with the product.
Required and supplementary documentation
O
Only commission the product once you have obtained the
following documentation and understood and complied with its
contents.
W System manual for the bus coupler (only on CD)
W System documentation
If the valve system contains pneumatic components:
W Documentation for the pneumatic components
If the unit contains input or output modules:
W System manual for the I/O modules (only on CD)
You can also find all instructions for the AV valve system
and the AES components on the CD R412018133. All
instructions for the SPM can be found on the USB stick.
Presentation of information
Warnings
In this documentation, there are warnings before the steps
whenever there is a risk of personal injury or damage to
equipment. The measures described to avoid these hazards must
be followed.
Safety instructions are set out as follows:
SIGNAL WORD
Hazard type and source
Consequences
O
Precautions
O
<List>
Safety sign, signal
Meaning
word
Indicates a dangerous situation which,
CAUTION
if not avoided, could result in minor or
moderate injury.
Indicates that damage may be inflicted
NOTICE
on the product or the environment.
Symbols
Operation may be impaired if this information is
disregarded.
4