GiBiDi BA24 Bedienungsanleitung Seite 42

40
UK
EXTERNAL CLOCK
C16
CLOSING ALLOWED
(set automatic closing)
EXTERNAL CLOCK
C17
CLOSING NOT ALLOWED
(set automatic closing)
EXTERNAL CLOCK
C18
AUTOMATIC OPENING AND
CLOSING COMMAND
C20
PHOTOCELL 1 TEST
Enables the RESERVE input for the connection of an external clock.
Operation:
When the clock closes the contact on the RESERVE input, following a
START command the door will open but not close automatically. When
the contact on the RESERVE input is opened, the door will
Y
automatically close after the pause time.
When the door is open, the closing command can be given with "start"
if the menu is STEP-BY-STEP or STEB-BY-STEP with STOP.
WARNING: remember to preset the automatic closing, the activation of
this menu automatically defuse C17-C18.
N Disables the RESERVE input
Enables the RESERVE input for the connection of an external clock.
Operation:
When the clock closes the contact on the RESERVE input, following a
START command the door will open but not close automatically. When
the contact on the RESERVE input is opened, the door will
Y
automatically close after the pause time.
It is not possible to activate the closing with the "start" command.
WARNING: remember to preset the automatic closing,the activation of
this menu automatically defuse C16-C18.
N
Disables the RESERVE input
Enables the RESERVE input for the connection of an external clock.
Operation:
When the clock closes the contact on the RESERVE input, an opening
command will automatically be activated without needing to give a
Y
START command. When the contact on the RESERVE input is opened,
the door will automatically close after the pause time.
WARNING: remember to preset the automatic closing, the activation of
this menu automatically defuse C16-C17.
N
Disables the RESERVE input
Enables the Photocell 1 test.
The photocell 1 transmitter must be connected to the clamps 14 and 17.
Operation:
Y
When the "Start" or the "Pedestrian" command is given, the power to
safety devices is cut off for 0,5 and then restored: if the photocell 1 input
opens and immediately returns NC the motors start, otherwise a fault will
be signalled by 4 blinks (1 sec.) of the flashing light.
N
Disables photocell 1 test.
BA24