GiBiDi BA24 Bedienungsanleitung Seite 39

BA24
A9
DEAD MAN LOGIC
MENU C: FUNCTION SELECTION
KEY +: enters the following menu C1-C2-C3...
KEY - : enters the previous menu C3-C2-C1...
KEY ESC: leaves the menu
KEY OK: activates Y (yes) / disactivates (N) the function.
Menu Function
C1
AUTOMATIC CLOSING
C2
FAST CLOSING
It activates the DEAD MAN logic
Operation:
Start opens only if the Start key is held down.
closes only if the Pedestrian key is held down.
Pedestrian
In Dead Man's mode the keys on the control unit assume the
following meanings:
+ key
- key
Y
The opening and closing movements in the dead man's mode stop
always on the first limit switch. Deceleration is never activated.
The only possible regulations are:
PHASE SHIFT IN OPENING – PHASE SHIFT IN CLOSING –
MOTOR POWER 1 AND 2 – AMPEROMETRIC LEVEL MOTOR 1
AND 2
If the keys are continuously held down, the flashing light remains
active even if the motors stopped on the limit switches.
Two motors always working.
The activation of this menu automatically disables A6-A7-A8.
Status Description
Enables total automatic closing H9.
YT Enables pedestrian automatic closing H11.
Pedestrian key uninfluential when in pause.
Enables only total automatic closing H9.
YS If the pedestrian opening is activated, the pedestrian key determines
the closing.
Enables only pedestrian automatic closing H11.
YP
The pedestrian input is uninfluential in pause
Disables the automatic closing.
If the pedestrian opening is activated, the pedestrian key will cause
the closing.
N
If the total opening is activated, the "Start" will cause the closing and
the pedestrian key will be uninfluential.
Enables fast closing function.
Operation:
Y
Active only on photocell 1.
Reduces the pause time to 3 seconds following interception and
subsequent freeing of the photocells.
N It disables the fast closing function
open
close
37
UK