Nordcap F 27SM series Bedienungsanweisung Seite 12

1. Remove the covers c from the body of the refrigerator and of the inner side of the
door. Also remove the upper bracket 6 together with the nut and washers and the
spacer under the bracket.
2. Remove the door of the freezer compartment.
3. Remove the bottom cover 1.
4. Remove the bottom bracket 2 together with washers on the axle and the plastic
spacer. Unscrew the axle together with washers from the bracket and screw them
into the aperture on the opposite side of the bracket symmetrically to former
position.
5. Remove the bottom bracket 7 and fix the bottom bracket 2 together with washers
on the axle and the plastic spacer instead of it. Screw the bracket 7 in place of the
bracket 2.
6. Hang the freezer compartment door on the axle of bracket 7.
7. Turn the bracket 6 around by 180° together with the washers on the axle and the
plastic spacer. Unsrew the axle and the washers and screw them on the other side
of the bracket. Once the bracket 6 is attached to the freezer compartment door, fix it
in place on the other side of the freezer in the uppermost apertures.
8. Use the covers c to cover the bracket and the remaining space.
9. Remove the bolt covers a and the stoppers b. Remove the screws that hold the
handles in place. Move the handles to the other side and screw them in place. Place
the stoppers into the remaining apertures in the door, and put the screw caps in
place.
11