Miele GDU 45/60-1 Montageanleitung Seite 25

Building into a corner
If you are building the dishwasher into a
corner you will only be able to secure
the dishwasher to an adjoining unit on
one side. The side which is against the
wall must be secured to the worktop
above it.
^ Open the dishwasher door.
The hole in the fixing plate must line
up with the long hole in the
protective cover plate under the
worktop as shown.
^ Secure the dishwasher to the worktop
from below with the 4 x 22
countersunk screws supplied using a
TORX T20 screwdriver.
^ Secure the dishwasher to the
adjoining kitchen unit on the other
side with the 4 x 25 screws supplied
using a TORX T20 screwdriver.
,
Do not use a cordless
screwdriver to secure the
dishwasher to the neighbouring
units.
Do not remove the plastic sleeves
from the screws.
^ Plug the openings with the plastic
stoppers supplied.
Ensure that the seal on the top edge
of the dishwasher fits directly
against the worktop.
If this is not the case, adjust the feet
a bit more.
G
25