Installation of your pet door. Please read the instructions.
This installation procedure covers the following pet door models: Access basic, Access classic, Access
upgradable & Access magnetic. Models Access upgradable & magnetic can be installed through walls
by purchasing additional tunnels (art.nr. 3620).
Disclaimer:
Important: If fitting into glass please do not attempt to fit by yourself, unless you are qualified glazier,
this is a job for the professional and may result in injury or damages.
For the professional glazier only:
The hole cut out size for glass installations for models:
- Access classic require a 223 mm dia cut out (9 1/4")
- Access upgradable & magnetic require a 267 mm dia cut out (10 1/2")
Please read the instructions carefully prior to installing the pet door.
Ensure that your pet will fit through the pet door prior to installation.
Tools required for installing your pet door:
- pencil
- jig or keyhole saw
- set square
- tape measure
Montage van het luikje. Lees a.u.b. de instructies.
De montageprocedure is toepasselijk voor de modellen: Access basic, Access classic, Access upgradable
& Access magnetic. Modellen Access upgradable & magnetic kunnen ook in de muur geïnstalleerd
worden door extra tunnels (art.nr. 3620) aan te schaffen.
Aansprakelijkheid:
Belangrijk: Probeer het luikje niet zelf te installeren in glas, tenzij u een professionele glazenmaker
bent, dit is een taak voor een professional. Zelf monteren kan leiden tot ernstige verwondigingen of
beschadigingen.
Voor de glazenmaker:
De opening voor glazen toepassingen voor de modellen:
- Access classic vereist een diameter van 223 mm
- Access upgradable & magnetic vereist een diameter van 267 mm
Lees aub de richtlijnen aandachtig vooraleer het luikje te monteren.
Verzeker uzelf ervan dat het luik voldoende groot is voor uw dier alvorens te installeren.
Benodigd materiaal voor installatie:
- potlood
- figuur- of bladzaag
- tekendriehoek
- meetlint
- ruler
- drill
- screwdriver
- liniaal
- boor
- schroevendraaier
3