Philips HD7854 Bedienungsanleitung Seite 15

4 To fasten the milk container lid onto the milk container, first
push the front of the milk container lid onto the edge of the milk
container ('click') (1) and then push the rear end onto the milk
container ('click') (2).
Always check if the lid is fixed properly onto the milk container to
prevent spillage when you place the milk container unit in the machine.
5 Slide the milk container unit into the coffee machine (1) and push
down the milk container lever ('click') (2).
Note: Make sure that the milk container is placed properly by pushing down
the milk container lever as far as possible ('click'). Proper placement of the
milk container is essential for obtaining properly frothed milk.
adjusting the drip tray height
1 Place one or two cups under the coffee spout.
Tip: Do not use cups that are too large as they cause the coffee to get cold
more quickly.
2 To minimise splattering, turn the knob to adjust the height of the
drip tray so that the top of your cup is just under the spout.
Brewing the desired coffee variety
1 Press the button indicating the number of cups of SENSEO
you want to brew.
- Press the 1-cup button q for one cup of black coffee, cappuccino, latte
macchiato or caffè latte.
- Press the 2-cup button qq for two cups of black coffee.
The SENSEO coffee machine starts brewing and automatically
, ®
supplies the correct amount of water and milk, depending on the
coffee variety you have selected.
Do not remove the water reservoir during a brewing cycle, as this
causes the machine to draw in air. When this happens, the next cup is
only partly filled.
Do not remove the milk container during a brewing cycle.
2 Remove the coffee pod or pods after use by lifting the pod holder
out of the machine and emptying it.
Be careful when you do this, as there may still be some water/coffee on the
coffee pod or pods.
EnglisH
15
coffee
®