Periodic Maintenance; Recommended Spare Parts - LAVOR Pro COMFORT S-R 66 Bedienungsanleitung

the machine is used during the first few weeks, it
might not be caused by actual machine malfun-
ctions. However, a specialised technician should
check the device if the relative breaker continues
to trip.
Remove and wash the squeegee
Drain the recovery tank
Drain, rinse with clean water or sanifi-
cate the recovery tank
Charge the batteries
Check the acid level in the battery cells
(if batteries are not maintenance-free)
Remove brushes and check for brush wear,
foreign bodies and wrapped belts
Only for model Comfort S-R 75CS
/ A18-R 5300
Remove and clean the waste container.
Verify the machine general conditions.
Verify that suction hose and conduct
are free from obstructions
Check the wear of the squeegee rubber
blades
Open and clean the solution water filter
Clean the brush plate, squeegee sup-
port and squeegee
Check the lifting/lowering of the brush
plate.
Check the lifting/lowering of the squee-
gee.
Grease the moving parts.
Check the control cable for the opening of
the solution water tap.
Verify the security devices ( emergency
switch, mechanical or electromechanical
brake, operator safety switch, etc).
Descale water hoses.

8.10 RECOMMENDED SPARE PARTS

You'll always be able to use your machine as effi-
ciently as possible by maintaining a stock of the
most common consumable materials and by sche-
duling routine and extraordinary maintenance. Con-
tact your dealer for a list of these spare parts.

8.9 PERIODIC MAINTENANCE

For all the operations described in the following
scheduled maintenance table, refer to the instruc-
tions and detailed warnings in the relative sections.
When After
needed every use
X
X
X
X X
X
X
X
X
43
Weekly Monthly
X
X
X
X
X
X
X
X
X
X