Kerbl 1085 Bedienungsanleitung Seite 31

Fix the antennas and heat shrink the tube
After another testing and proper performance fix the antennas with the other screws and heat the shrink tubes carefully
in order to seal the connections.
When you have fixed the antennas permanently you will need to heat the shrink tubes around the cable joints between
the antenna cables and the antennas. Make sure that the shrink tubes cover these joints and then use a lighter to heat
the tubes around the joints. The shrink tubes will prevent rust from appearing on the joints, which would decrease the
signal quality. Heat slowly and carefully!
Congratulation! Now you have completed the installation of your StableCamSet.
Enjoy the wireless supervision of your stable!
Usage of the CameraSet as a TrailerCamera
You can use the camera and the LCD monitor as well as a trailercamera monitoring your animal while transporting them.
Have a look at the picture in order to understand the functionality
What parts are in the set to be used in the trailer
• Camera inkl. Pin antenna
• LCD-monitor
• 1 LCD-monitor holder with suction cup mounts
• 1 Car cigarette lighter charger for LCD-monitor (5V DC output)
• 1 Extra mounting foot for easy movement of camera between stable and trailer
• 1 Power cable for camera, pin plug with bare black/red end
31